363 research outputs found

    Two-way coherent Doppler error due to solar corona

    Get PDF
    Two-way coherent Doppler errors resulting from phase scintillations induced on the uplink by the solar corona are considered. It is shown that this error can be estimated by taking statistics on the differential Doppler measurements. Typical estimates for the error are given for four Sun-Earth-probe angles and for integration times ranging from 1 second to 1 minute. These results are based on data collected during the 1985 Voyager 2 conjunction

    The flight performance of the Galileo orbiter USO

    Get PDF
    Results are presented in this article from an analysis of radio metric data received by the DSN stations from the Galileo spacecraft using an Ultrastable Oscillator (USO) as a signal source. These results allow the health and performance of the Galileo USO to be evaluated, and are used to calibrate this Radio Science instrument and the data acquired for Radio Science experiments such as the Redshift Observation, Solar Conjunction, and Jovian occultations. Estimates for the USO-referenced, spacecraft-transmitted frequency and frequency stability were made for 82 data acquisition passes conducted between launch (Oct. 1989) and Nov. 1991. Analyses of the spacecraft-transmitted frequencies show that the USO is behaving as expected. The USO was powered off and then back on in Aug. 1991 with no adverse effect on its performance. The frequency stabilities measured by Allan deviation are consistent with expected values due to thermal wideband noise and the USO itself at the appropriate time intervals. The Galileo USO appears to be healthy and functioning normally in a reasonable manner

    Radio-science performance analysis software

    Get PDF
    The Radio Science Systems Group (RSSG) provides various support functions for several flight project radio-science teams. Among these support functions are uplink and sequence planning, real-time operations monitoring and support, data validation, archiving and distribution functions, and data processing and analysis. This article describes the support functions that encompass radio-science data performance analysis. The primary tool used by the RSSG to fulfill this support function is the STBLTY program set. STBLTY is used to reconstruct observable frequencies and calculate model frequencies, frequency residuals, frequency stability in terms of Allan deviation, reconstructed phase, frequency and phase power spectral density, and frequency drift rates. In the case of one-way data, using an ultrastable oscillator (USO) as a frequency reference, the program set computes the spacecraft transmitted frequency and maintains a database containing the in-flight history of the USO measurements. The program set also produces graphical displays. Some examples and discussions on operating the program set on Galileo and Ulysses data will be presented

    The Deep Space Network as an instrument for radio science research

    Get PDF
    Radio science experiments use radio links between spacecraft and sensor instrumentation that is implemented in the Deep Space Network. The deep space communication complexes along with the telecommunications subsystem on board the spacecraft constitute the major elements of the radio science instrumentation. Investigators examine small changes in the phase and/or amplitude of the radio signal propagating from a spacecraft to study the atmospheric and ionospheric structure of planets and satellites, planetary gravitational fields, shapes, masses, planetary rings, ephemerides of planets, solar corona, magnetic fields, cometary comae, and such aspects of the theory of general relativity as gravitational waves and gravitational redshift

    Radio science ground data system for the Voyager-Neptune encounter, part 1

    Get PDF
    The Voyager radio science experiments at Neptune required the creation of a ground data system array that includes a Deep Space Network complex, the Parkes Radio Observatory, and the Usuda deep space tracking station. The performance requirements were based on experience with the previous Voyager encounters, as well as the scientific goals at Neptune. The requirements were stricter than those of the Uranus encounter because of the need to avoid the phase-stability problems experienced during that encounter and because the spacecraft flyby was faster and closer to the planet than previous encounters. The primary requirement on the instrument was to recover the phase and amplitude of the S- and X-band (2.3 and 8.4 GHz) signals under the dynamic conditions encountered during the occultations. The primary receiver type for the measurements was open loop with high phase-noise and frequency stability performance. The receiver filter bandwidth was predetermined based on the spacecraft's trajectory and frequency uncertainties

    ExoMars Schiaparelli Direct-to-Earth Observation using GMRT

    Get PDF
    During the ExoMars Schiaparelli separation event on 16 October 2016 and Entry, Descent, and Landing (EDL) events 3 days later, the Giant Metrewave Radio Telescope (GMRT) near Pune, India, was used to directly observe UHF transmissions from the Schiaparelli lander as they arrive at Earth. The Doppler shift of the carrier frequency was measured and used as a diagnostic to identify key events during EDL. This signal detection at GMRT was the only real‐time aliveness indicator to European Space Agency mission operations during the critical EDL stage of the mission

    ExoMars Schiaparelli Direct-to-Earth Observation using GMRT

    Get PDF
    During the ExoMars Schiaparelli separation event on 16 October 2016 and Entry, Descent, and Landing (EDL) events 3 days later, the Giant Metrewave Radio Telescope (GMRT) near Pune, India, was used to directly observe UHF transmissions from the Schiaparelli lander as they arrive at Earth. The Doppler shift of the carrier frequency was measured and used as a diagnostic to identify key events during EDL. This signal detection at GMRT was the only real‐time aliveness indicator to European Space Agency mission operations during the critical EDL stage of the mission

    Space-time localization of inner heliospheric plasma turbulence using multiple spacecraft radio links

    Get PDF
    Radio remote sensing of the heliosphere using spacecraft radio signals has been used to study the near-sun plasma in and out of the ecliptic, close to the sun, and on spatial and temporal scales not accessible with other techniques. Studies of space-time variations in the inner solar wind are particularly timely because of the desire to understand and predict space weather, which can disturb satellites and systems at 1AU and affect human space exploration. Here we demonstrate proof-of-concept of a new radio science application for spacecraft radio science links. The differing transfer functions of plasma irregularities to spacecraft radio up- and downlinks can be exploited to localize plasma scattering along the line of sight. We demonstrate the utility of this idea using Cassini radio data taken in 2001-2002. Under favorable circumstances we demonstrate how this technique, unlike other remote sensing methods, can determine center-of-scattering position to within a few thousandths of an AU and thickness of scattering region to less than about 0.02 AU. This method, applied to large data sets and used in conjunction with other solar remote sensing data such as white light data, has space weather application in studies of inhomogeneity and nonstationarity in the near-sun solar wind.Comment: 28 Pages including 14 Figures (7 unique figures in both inline format and full-page format)

    The Study of the Pioneer Anomaly: New Data and Objectives for New Investigation

    Full text link
    Radiometric tracking data from Pioneer 10 and 11 spacecraft has consistently indicated the presence of a small, anomalous, Doppler frequency drift, uniformly changing with a rate of ~6 x 10^{-9} Hz/s; the drift can be interpreted as a constant sunward acceleration of each particular spacecraft of a_P = (8.74 \pm 1.33) x 10^{-10} m/s^2. This signal is known as the Pioneer anomaly; the nature of this anomaly remains unexplained. We discuss the efforts to retrieve the entire data sets of the Pioneer 10/11 radiometric Doppler data. We also report on the recently recovered telemetry files that may be used to reconstruct the engineering history of both spacecraft using original project documentation and newly developed software tools. We discuss possible ways to further investigate the discovered effect using these telemetry files in conjunction with the analysis of the much extended Doppler data. We present the main objectives of new upcoming study of the Pioneer anomaly, namely i) analysis of the early data that could yield the direction of the anomaly, ii) analysis of planetary encounters, that should tell more about the onset of the anomaly, iii) analysis of the entire dataset, to better determine the anomaly's temporal behavior, iv) comparative analysis of individual anomalous accelerations for the two Pioneers, v) the detailed study of on-board systematics, and vi) development of a thermal-electric-dynamical model using on-board telemetry. The outlined strategy may allow for a higher accuracy solution for a_P and, possibly, will lead to an unambiguous determination of the origin of the Pioneer anomaly.Comment: 43 pages, 40 figures, 3 tables, minor changes before publicatio

    The Sardinia Space Communication Asset: Performance of the Sardinia Deep Space Antenna X-Band Downlink Capability

    Get PDF
    The Sardinia deep space antenna (SDSA), managed by the Italian Space Agency (ASI) has started its operations in 2017 aiming to provide tracking and communication services for deep space, near earth, and lunar missions, and to support new and challenging radio science experiments. The SDSA shares with the Sardinia Radio Telescope (SRT) a part of the system and infrastructure, but has its own specific equipment and a dedicated control center. The current SDSA capabilities involve the X-band (8.4 GHz-8.5 GHz) reception of telemetry from deep space probes within interplanetary missions. In this work we describe the development and performance of the X-band receiving system. It was designed and assembled with the cooperation of both the NASA-Jet Propulsion Laboratory (JPL) and the European Space Agency (ESA). Specifically, NASA-JPL provided the X-band feed and the cryogenic receiver installed in a suitable focus of the SRT devoted to space applications, and ESA provided the intermediate frequency modem system (IFMS) for signal processing. The coupling of the X-band feed with the parabolic reflector of the SRT and the radiating features of the SDSA have been evaluated with simulations performed using CST Studio Suite and GRASP by Ticra. The telecommunication performance of the system has been assessed by measurements and experiments showing a good agreement between estimates and simulations
    corecore